Operating Instructions
PLEASE READ AND FOLLOW ALL THE INSTRUCTIONS BEFORE USING THE SOLAR LIGHT.SAVE THIS MANUAL FOR FUTURE REFERENCE.
How to Prepare for a Successful Assembly:
Read all instructions before assembly and installation. \
DELIVERY CONTENTS
1.
Solar light
2.
Ground spike
4.
Operating instructions
5.
Safety instructions
How the Solar Light Work:
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored
in the rechargeable Ni-Mh batteries. At night, the solar light is powered by the batteries using the electricity stored
during the day. The operating time depends on geographical location, daily weather conditions, and season. For
instance, the solar light absorbs less sunlight in winter; the operating time will be reduced accordingly.
Winter Tips:
Keep debris and snow off the solar panel to allow batteries to recharge.
How to Choose a Right Location:
Install the solar light in a location with full, direct sunlight. Ensure that the installation location is away from other
nighttime light sources such as street or porch lamps. These sources may prevent solar light from automatically turning
on.
Charging the battery:
•
For optimum performance, it is best to install the solar light in full, direct sunlight and let it charge for 10 to 12 hours
before the first-time use.
•
Allow the light to run at least 8 to 12 entire charging and discharging cycles to reach the maximum capacity of the
battery.
How to assembly the solar light:
1.
Twist and remove the top cover (A) from the housing (B) counterclockwise. Turn the switch on. (FIRST TIME USE
2. ONLY.)
3.
Firmly slide the pole (C) into the solar housing (B).
4.
Attach the pole (C) to stake (D).
5. Push the assembly firmly into the ground.
Problems
•
The nightly runtime for the lights is short.
•
The solar light does not turn on at night.
•
Find no stake.
