Conrad C-Control Pro Mega Series Manual Download Page 65

Page: 65 / 240

IDE

In the options can also be selected if a

4.1.6

Library Management

In the Library Management the source text libraries can be chosen that will be compiled in addition
to the project files.

Only those files will be used for compilation whose CheckBox has been selected.

The list can be altered by use of the path text input field "Library Name" and the buttons in the
dialog:

Add

– The path will be added to the list.

Replace

– The selected entry in the list is replaced by the path name.

Delete

– The selected list entry is deleted.

Update Library

– Files present in the

Compiler Presetting

but not in this list will be added.

Summary of Contents for C-Control Pro Mega Series

















































































































































































































































Search results

Summary of Contents for C-Control Pro Mega Series

Reviews:

Conrad C-Control Pro Mega Series, Manual, Page: 65 / 240

Search results

Summary of Contents for C-Control Pro Mega Series

Reviews: