Conrad.Art.Nr. 301092, Alt Saxophone
Assembling procedure and method
1.
Take the reed out of reed box, then put into mouth to be wet ( it’s
helpful to play). At the same time, put neck tube into upper tube hold
and push downwards slowly. If it’s hard to push, add some lubricating
oil on it. When it reaches the right position, tighten the screws.
2.
Take the reed out of mouth, and put it on mouthpiece making plane of
reed be on top of that of mouthpiece while reed top on line of
mouthpiece. Use thumb of left hand to press reed on the mouthpiece
and right hand to cover reed coat on the mouthpiece. Look from the
top of reed, it’s right that you can see the top of mouthpiece, then
sew-up line is right to the middle of reed. Tight the reed by screwing
upper and lower screws of reed coat.
3.
Add some lubricating oil on the cork of neck tube, and push
mouthpiece upwards neck tube cork. Twist mouthpiece slowly to
regulating tune. When you don’t play it, put mouthpiece coat
carefully on the mouthpiece.
4.
Hang the belt on your neck, then hang musical instrument on the belt
pothook regulating highness.
