EMAIL:
Trainer Setup for 26”, 27” & 700C wheeled bikes w/
fig 1
fig. 2
fig. 5
1. Remove all packaging unfold the
(numbered 1-5) to level trainer frame with floor, if necessary (fig. 6).
2. Line up holes, then use screws (A) and
assembly (E) to bracket on frame
3. Use nut and bolt (D in fig. 1) to affix
4. Replace rear wheel skewer on bik
properly, for stability and for safety.
5. Install the bike’s rear hub between the
within couplings. Do not over tighten.
*Review and follow instructions prior to each use, and keep
*Use the product only as described in this manual.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Refer to the documentation for any questions. If you are unsure of use or have warranty inquiries,
please visit ConquerEquipment.com
Product name: Conquer Pro Indoor Bike
Exercise Machine 5 Speed Magnetic
SKU: 530-TRNR5SPD
EMAIL:
TEL: 855-349-4327
help.ConquerEquipment.com
WEB: help.conquerequipment.com TEL:
, 27” & 700C wheeled bikes w/Quick Release
fig. 3
fig. 4
fig.6
unfold the trainer’s frame, and place on a level floor (fig. 5 below
5) to level trainer frame with floor, if necessary (fig. 6).
se screws (A) and Allen wrench/screwdriver (B) pictured in fig.
(fig. 2).
) to affix magnetic resistance unit (fig. 3) to bracket/frame (fig. 4).
4. Replace rear wheel skewer on bike with included skewer (fig. 6). This is to make your bike fit
properly, for stability and for safety.
5. Install the bike’s rear hub between the lever clamps/couplings (fig. 6), and adjust wing nuts
Do not over tighten.
*Review and follow instructions prior to each use, and keep with trainer for future reference.
only as described in this manual.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Refer to the documentation for any questions. If you are unsure of use or have warranty inquiries,
please visit ConquerEquipment.com
Plastic foot
Twist plastic feet on base
(if necessary) to level unit
on uneven floors.
Conquer Pro Indoor Bike Trainer
Exercise Machine 5 Speed Magnetic Resistance
.ConquerEquipment.com
TEL: 855-349-4327
Quick Release Wheels
below). Twist plastic feet
fig. 1 to attach resistance knob
) to bracket/frame (fig. 4).
This is to make your bike fit in the trainer
, and adjust wing nuts to lock the rear hub
trainer for future reference.
*Refer to the documentation for any questions. If you are unsure of use or have warranty inquiries,
Plastic foot
Twist plastic feet on base
(if necessary) to level unit
on uneven floors.
