www.connects2.com
2
Connects2Vision
CONTENTS
- Camera switching unit with 0.3m cable with RCA Male video input and Male DC
power connector for front view camera
- RCA Female video input for rear view camera
- RCA Male video output
- DC power connection wires
- Front view camera trigger input wire
- +12V output wire
INSTALLATION
1. Connect the Black wire to a suitable ground and the Red wire to a switched
+12V supply
2. Connect the Green +12v output wire to the display monitor (if required)
3. Connect the Blue front view camera trigger input wire to the brake light circuit or
a separate sw12V feed if preferred.
4. Connect the rear view cameras video output to the RCA Female video input
connector which is labelled “BACK CAM” and take power from the reversing light
circuit or an interface which provides a reverse signal.
5. Connect the front view cameras video output to the RCA Male video input
connector and take power from the Male DC power connector. Both which are
labelled “FRONT CAM”
6. Connect the RCA Male video output connector to the display monitor
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2
