USB WIRELESS ADAPTER
INSTALLATION GUIDE
Thank you for buying this IEEE 802.11b/g /n USB wireless adapter. It is easy to use and to install. It is
the ideal solution to install and configure a wireless network without the hassle of cables.
Features
EEE 802.11b/g/n WIRELESS USB adapter
Supports USB v2.0/1.1, MIMO 1T1R
Transfer rate up to 150 Mbps in 1T1R mode in IEEE 802.11n
WPS function to connect automatically to secure WIFI network
Supports 64/128-bit WEP, WPA, WPA2 encryptions
Windows XP/VISTA/7
Driver and utility installation
If you plan to use the Windows wireless zero configuration, report to Microsoft. Documentation.
We will use the utilty developped by Ralink the chipset manufacturer.
To install the driver, run as administrator.
Double click on the setup file Ralink_RT5370.exe on the CD in Windows folder.
Choose to install the driver and the utility. Click on Next.
Click on Install . Wait a while. Click on Finish .
After the utility installation insert the wireless adapter in a free USB port of your computer. It is
recommendable to connect it directly to your USB port instead of on USB hub to avoid any issue.
You can use extension USB cable.
