User’s Manual
GENERAL SPECIFICATION
Front panel I/O BOX with its connected cables
INSTALLATION:
A. Make sure the computer Power is off after shut down the computer and open the
cover of the computer;
B. Remove the 5.25
"
plastic cover from the computer where is the free bay you want
to install;
C. Install the transfer board to the empty bay,fix it by screws.
D. Connect the cables attached to the BOX to the correct pins where on the Mother
board when the BOX is installed:
1. USB Port
Take the USB module cable to the USB 2.0 connectors which on the Monther board
Summary of Contents for Front panel I/O Box
Page 6: ...2...
Page 7: ...BIOS setup program...
