EasyScopeIII for DS60M10 User Guide
Version 1.3
Document Reference No.: CP_000037 Clearance No.: CP#027
Copyright © Connective Peripherals Pte Ltd
17
3.3.5
Trigger Settings
Basic trigger settings are configured using the controls on the trigger panel as shown in the figure below.
Figure 17- Trigger Settings
Auto
Allows the scope to free-run and constantly collect data without waiting for a trigger event.
ChA
Forces the scope to wait on a trigger event on Channel A defined by the other trigger controls before the
display is updated.
ChB
Forces the scope to wait on a trigger event on Channel B defined by the other trigger controls before the
display is updated.
Triggered Indicator
The “Triggered” indicator shows whether the scope was triggered by the selected condition(s).
Trigger Modes
Edge Trigger
The default mode is edge trigger which can be set to trigger on a rising or falling edge using the front
panel. The default is the rising edge.
In the figure below,
icon indicates -ve (falling) edge and
icon indve (rising) edge.
