OPERATING INSTRUCTIONS
HAND TOOL FOR BLIND RIVET NUTS M5-M10
AND BLIND RIVET BOLTS M5-M8
Manual
PL-10N
PL-10N
TECHNICAL INFORMATION
Capacity:
Blind rivet nuts M5 - M6 - M8 - M10
Blind rivet bolts M5 - M6 - M8
Material:
Aluminium, Steel and Stainless Steel
Size:
463 mm (L) x 168 mm (H) 83 mm (P)
20 mm (0
Weight:
1.29 Kg
DESCRIPTION OF THE TOOL
1. Tool Body
2. Left and right lever
3. Turning knob
4. Mandrel M10
5. Anvil M10
6. Counter lock nut
7. Front sleeve with stroke indicator
8. Adjust nut
Read the manua
l
INSTRUCTIONS
The hand tool will be standard equipped with the M10 anvil and M10
mandrel for Rivet nuts.
The other components will be stored separate in the carton box.
FIRST USE:
Make sure before using the tool that the anvil and the mandrel are
suitable for the thread of the insert to be used. Otherwise change it to
a different size.
CHANGE TO A DIFFERENT SIZE RIVET NUT:
Open the levers (2) Now Unscrew the anvil (5) and the lock nut (6). Turn/
Pull the turning nob (3) away from the tool. This way it will come loose,
and you will be able to withdraw the mandrel from the tool. Replace by
choosing the correct size from the spare parts in the carton box, and
re-assemble by following the above steps in the opposite direction.
*
To change into setting Rivet bolts, choose the correct size Rivbolt
puller, and combine it with the correct Anvil and lock nut.
A
8
7
4
5
6
2
2
3
H
L
ANVIL ADJUSTMENT:
After adjusting the stroke, is it necessary to adjust the anvil (5) and its
counter lock nut (6).
Open the levers completely. This way the mandrel will come out
completely. The protrusion of the mandrel out of the anvil should be as
long as the whole rivet nut. This to make sure the full thread of the rivet
nut will be used to set the rivet nut. Unscrew the counter lock nut (6)
and adjust the anvil (5) by turning left or right, to increase or decrease
the length. After the correct length is applied, screw the counter lock
nut until it is tight. Changing the threaded inserts or stroke requires this
step ever time.
C
SETTING A THREADED INSERT:
Put the tool in start position by opening the levers up to a maximum,
so that the mandrel will come out completely. Screw the insert on the
threaded end of the mandrel, and make sure it is completely tight. Now
insert it into the hole of the material. The hole size must be slightly
larger than the rivet nut. Check the specifications of the rivet nut to
be sure. Close the levers completely to set the rivet nut. Once the rivet
nut is set, unscrew the threaded insert by using the turning knob on
the mandrel.
D
6
5
STROKE ADJUSTMENT:
Close the levers completely and use the adjust nut to increase or
decrease the stroke. The higher the stroke, the higher the deformation
of the rivet nut will be, and vice versa.
The stroke is dependent on:
• The grip range
• The blind rivet nut
B
1
pull-link
1
04L00056
7
04Z20951
13
04L20803
19
04Z20952
25
04L20158
31
04L20166
2
04L21095
8
04F00102
14
04L20156
20
04L20468
26
04L20159
3
04L21077
9
04L21636
15
04F60166
21
04L00053
27
04L21006
4
04L20152
10
04L20469
16
04Z20954
22
04L00054
28
04L21007
5
04L20153
11
04L22253
17
04L22264
23
04L00055
29
04L21008
6
04F60364
12
04L22252
18
04L22258
24
04L20157
30
04Z20111
Manual
PL-10N
0
P
