Connect Tech SMARC 2.0 Carrier User Manual Download

Page: 22 / 22

SMARC 2.0 Carrier

Users Guide

www.connecttech.com

Document: CTIM-00154
Revision: 0.04

Page 22 of 22

Date: 2021-06-18

TYPICAL INSTALLATION

Ensure all external system power supplies are off.

Install the SMARC module into the MXM connector. Be sure to follow the manufacturer’s direction

for proper heatsink/heat spreader installation and any other cooling instructions from the
manufacturer.

Install the necessary cables for the application. For the relevant cables, see the Cables and
Accessories section of this manual.

Connect the power cable to the SMARC 2.0 Carrier then to the power supply.

Switch on the power supply. DO NOT power up your SMARC system by plugging in live power.

CABLES

Part Number

Drawing

Description

QTY

MSG068

CTIC-00570

+5V DC Power Kit

CBG248

CTIC-00592

10-pin PicoBlade IO cable w/ flying leads

CBG249

CTIC-00593

6-pin PicoBlade IO cable w/ flying leads

CBG250

CTIC-00594

3-pin PicoBlade IO cable w/ flying leads

CBG136

CTIC-00477

RTC Battery Cable

For CSI Camera accessories please contact [email protected] to discuss camera options.

Summary of Contents for SMARC 2.0 Carrier























Search results

Summary of Contents for SMARC 2.0 Carrier

Reviews:

Related manuals for SMARC 2.0 Carrier

Brands by name

Popular brands

Connect Tech SMARC 2.0 Carrier, User Manual

Search results

Summary of Contents for SMARC 2.0 Carrier

Reviews:

Related manuals for SMARC 2.0 Carrier

Brands by name

Popular brands