Connect Tech QKG201, User Manual

Page: 15 / 33

TrailBlazer/SBC
Users Guide
www.connecttech.com
Document: CTIM-00432
Revision: 0.04
Page 15 of 33
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2018-01-05
DisplayPort/HDMI/DVI Connector
Function
DisplayPort/HDMI/DVI Connector (DisplayPort Output)
Location P3
Type FCI Minitek Double Row 10 x 2
P/N
98414-G06-20LF
Mating 10073599-020LF
Cable
CBG113
Pinout
Pin Description Pin Description
1 DP0+ 2 DP3+
3 DP0- 4 DP3-
5 GND 6 GND
7 DP1+ 8 DPAUX-
9 DP1- 10 DPAUX+
11 GND 12 GND
13 DP2+ 14 Hot Plug Detect
15 DP2- 16 GND
17 GND 18 GND
19 +3.3V 20 DP/TMDS SEL
[1]
Note [1]: Cable assembly must tie low (GND) for DisplayPort output
Qseven Gen 2.0 Module DisplayPort/HDMI/DVI
The new Qseven Gen 2.0 Specification introduced DisplayPort as a video output format for Qseven Gen 2.0
Modules that utilizes the same pins as HDMI/DVI in Gen 1.0 Modules. However the DisplayPort Auxiliary
signals and the HDMI/DVI Clock and Data signals do not share the same pins like Disp+. The
TrailBlazer/SBC has on-board switching circuitry to enable the selection of either HDMI/DVI or DisplayPort.
To switch between display formats, a change to the Qseven Module BIOS may be required; as well as the
connection of the appropriate cable.
DisplayPort/HDMI/DVI