Button setting
You may program button1 and button2 for special functions as defined below. Each
key can be defined separately for differently functions depending on if you give the
key a short press or a long press.
Unassigned
This key is not assigned with any function
One Touch Call 1~6
Allow user to initiate digital group call, digital private call,
call alert or send preset message via the one touch call
function.
Manual Dial for Private You can manually input the private call number for calling.
Emergency On
Allow user to make an emergency call.
Monitor
Enables and disables the monitor function
Backlight Auto On/Off
This function allows the user to have the backlight on
continuously or only on for five seconds after a key has
been pressed
Keypad Lock
Allows user to enable the keypad lock feature. If the
keypad lock is enabled user can only operate the PTT
key and side button. Press MENU and # key to
unlock.
Scan On/Off
Allow user to enable or disable the scan function.
All Alert Tones on/off
Allow user to enable or disable all alert tones
Battery Indicator
Indicates battery charge left
Short Message
Allows you to enter the message function menu
Zone Toggle
Allows you to enter the zone selection function
AD Switch
Selects between the Analog and Digital Modes
Contacts
Allow you to enter the Contacts menu
Radio Enable
Sends an enable command to a private call contact.
Radio Disable
Sends a disable command to a private call contact.
Radio Check
Sends a device check command to a private call contact
Remote Monitor
Allows you to remotely monitor another radio
High/Low Power
Allows user to switch between high and low power
Repeater/Talkaround
Allows radio to communicate through a repeater or speak
directly to another radio without a repeater.
Vox On/Off
Enables and disables the VOX function
Nuisance Delete
While scanning, allows you to remove a channel from the
scan list.
Permanent Monitor
Enables and disables the monitor function. Only works
with a long key press
