manualshive.com logo in svg

Congatec conga-JC370, User Manual, Page: 54 / 55

Share
Download
Congatec conga-JC370 User Manual Download Page 54

Copyright 

© 

2019 

congatec 

AG 

 

      JCWLm10 

       

54/55

7 

BIOS Setup Description

The BIOS setup description of the conga-JC370 can be viewed without having access to the module. However, access to the restricted area of 
the congatec website is required in order to download the necessary tool (CgMlfViewer) and Menu Layout File (MLF).

The MLF contains the BIOS setup description of a particular BIOS revision. The MLF can be viewed with the CgMlfViewer tool. This tool offers 
a search function to quickly check for supported BIOS features. It also shows where each feature can be found in the BIOS setup menu.

For more information, read the application note “AN42 - BIOS Setup Description” available at www.congatec.com.

 

Note

If you do not have access to the restricted area of the congatec website, contact your local congatec sales representative.

7.1 

Navigating the BIOS Setup Menu

The BIOS setup menu shows the features and options supported in the congatec BIOS. To access and navigate the BIOS setup menu, press the 
<DEL> or <F2> key during POST. The right frame displays the key legend. Above the key legend is an area reserved for text messages. These 
text messages explain the options and the possible impacts when changing the selected option in the left frame.

7.2 

BIOS Versions

The BIOS displays the BIOS project name and the revision code during POST, and on the main setup screen. The initial production BIOS for 
conga-JC370 is identified as JVWLR1xx or JUWLR1xx, where:

 

•

R is the identifier for a BIOS ROM file,

 

•

1 is the so called feature number and 

 

•

xx is the major and minor revision number.

The binary size for JVWL and JUWL is 32 MB.

Summary of Contents for conga-JC370
























































Reviews:

No comments