![Congatec conga-JC370 User Manual Download Page 43](http://html1.mh-extra.com/html/congatec/conga-jc370/conga-jc370_user-manual_2652485043.webp)
Copyright
©
2019
congatec
AG
JCWLm10
43/55
Note
1. The mating RS422/RS485 connector must have a termination resistor.
2. The mating RS485 connector must connect the DATA+ pins together and the DATA- pins together.
Connector Type
X10: Standard 9-pin DSUB male connector
X11: 9-pin, 1.25 mm pitch picoblade header (Molex 0533980971)
Possible Mating Connector: Molex 0510210900
5.8.2
COM Port 3 and 4 Headers
The conga-JC370 provides COM port 3 on X12 and COM port 4 on X13. The ports support RS 232 voltage level.
Table 30 X12/X13 Pinout Description
Pin Signal
Description
1
GND
Ground
2
TXD
Transmit data
3
RTS
Request to Send
4
CTS
Clear to Send
5
RXD
Receive data
Connector Type
X12/X13: 5-pin, 1.25 mm pitch picoblade header (Molex 0533980571)
Possible Mating Connector: Molex 0510210500
X12/X13