Copyright
©
2019
congatec
AG
JCWLm10
15/55
2.4
Supply Voltage Power
•
12–24 V DC ± 5 %
2.5
Power Consumption
The power consumption values were measured using the following test setup:
•
Input v12 V
•
conga-JC370 SBC
•
conga-JC370 CSA
•
Microsoft Windows 10 (64 bit)
Note
The CPU was stressed to its maximum workload with the Intel
®
Thermal Analysis Tool.
Table 7
Measurement Description
The power consumption values were recorded during the following system states:
System State
Description
Comment
S0: Minimum value
Lowest frequency mode (LFM) with minimum core voltage during
desktop idle
S0: Maximum value
Highest frequency mode (HFM/Turbo Boost).
The CPU was stressed to its maximum frequency
S0: Peak current
Highest current spike during the measurement of “S0: Maximum
value”. This state shows the peak value during runtime
Consider this value when designing the system’s power supply, to ensure
sufficient power is supplied during worst case scenarios
S3
SBC is powered by 12 V
S5
SBC is powered by 12 V
Note
1. The fan and SATA drives were powered externally.
2. All other peripherals except the LCD monitor were disconnected before measurement.
