Copyright
©
2018
congatec
AG
T6COm10.indd
23/45
5.2.6
Surround Sound Header
The conga-IT6/COMe provides a surround sound header (X24).
Table 15 X24 Pinout Description
Pin Signal
Description
Pin Signal
Description
1
LINE1_L
1st Analog line input left channel
2
A_GND
Analog ground
3
A_GND
Analog ground
4
LINE1_R
1st Analog line input right channel
5
SIDE_L
Analog side output left channel
6
A_GND
Analog ground
7
A_GND
Analog ground
8
SIDE_R
Analog side out right channel
9
SURR_L
Analog surround out left channel
10
A_GND
Analog ground
11
A_GND
Analog ground
12
SURR_R
Analog surround out right channel
13
CENTER
Analog center output
14
A_GND
Analog ground
15
A_GND
Analog ground
16
LFE
Analog low frequency output
17
-
No pin
18
SENSE
Jack detection for HDA codec
Connector Type
X24: 9x2 pins, 2.00 mm pitch
Note
This header is not supported by the standard BIOS:
BIOS Version
Surround Audio (X24)
SPDIF/DMIC (X26)
Internal Speaker (X27)
Standard BIOS
N/A
N/A
N/A
Customized BIOS
Surround Out with Line-In
DMIC
N/A
Customized BIOS
Surround Out without Line-In SPDIF Out
Supported
Contact congatec technical support for more information about a customized BIOS.
5.3
LPC Interfaces
The interfaces in the following subsections are routed from an LPC Super I/O controller (Winbond W83627UHG).
Note
The module must also support the interfaces for them to function.
Pin 1
Pin 18
No Pin
X24
