manualshive.com logo in svg

Congatec 065450, User Manual, Page: 55 / 75

Share
Download
Congatec 065450 User Manual Download Page 55

Copyright 

© 

2020 

congatec 

AG 

 

      DSTXm10 

       

55/75

Power Control

Displays the current power status and also options to power off, power on, power cycle, hard reset or shut down the remote system

Maintenance

Shows BMC firmware information and general firmware maintenance and system administration options

Sign out

Provides option to log out of the current MegaRAC session

7.2.1.3 

KVM Remote Control Operation

The remote control allows you to do the following:

 

•

control the conga-STX7 operating system remotely, using KVM over IP

 

•

redirect local client CD or DVD images as a virtual device on the remote system

 

•

reset, power cycle or shutdown the conga-STX7 

 

Note

Use a primary (integrated) video device for remote control. The remote control operation will fail if you use an external video card.

Control Operating System Remotely

1.  From the menu bar, click 

Remote Control

. 

Summary of Contents for 065450












































































Reviews:

No comments