Copyright © 2021 congatec GmbH
TCTLm02
26/67
5.1.3.2
LVDS/eDP
The conga-TC570 offers an LVDS/eDP interface. This interface is configured in the BIOS to support LVDS by default. For eDP support, go to
Advanced -> Graphics -> Active LFP Configuration in the BIOS setup menu and select “eDP”.
The LVDS
1
interface supports:
•
single or dual channel LVDS (color depths of 18 bpp or 24 bpp)
•
integrated flat panel interface with clock frequency up to 112 MHz
•
VESA and OpenLDI LVDS color mappings
•
automatic panel detection via Embedded Panel Interface based on VESA EDID
TM
1.3
•
resolution up to 1920x1200 in dual LVDS channel mode
The eDP
1,2
interface supports:
•
eDP 1.4 specification
•
Spread-Spectrum Clocking
•
eDP display authentication
Note
1.
The LVDS/eDP interface does not support both LVDS and eDP signals at the same time.
2.
The eDP interface does not support HDCP
5.1.3.3
VGA
The Intel
®
Tiger Lake IoT UP3 SoC does not natively support VGA interface. However, the conga-TC570 commercial variants support this
interface by integrating a DisplayPort to VGA adapter chip.
Note
For VGA support on industrial variants, you need a customized conga-TC570 variant.
