Congatec 049000 User Manual Download | Manualshive

Page: 40 / 75

background image

Copyright

©

2018

congatec

GmbH

TSCOm17

40/75

7.2

OEM BIOS Customization

The conga-TS370 is equipped with congatec Embedded BIOS, which is based on American Megatrends Inc. Aptio UEFI firmware. The congatec
Embedded BIOS allows system designers to modify the BIOS. For more information about customizing the congatec Embedded BIOS, refer to
the congatec System Utility user’s guide CGUTLm1x.pdf on the congatec website at www.congatec.com or contact technical support.

The customization features supported are described below:

7.2.1

OEM Default Settings

This feature allows system designers to create and store their own BIOS default configuration. Customized BIOS development by congatec for
OEM default settings is no longer necessary because customers can easily perform this configuration by themselves using the congatec system
utility CGUTIL. See congatec application note AN8_Create_OEM_Default_Map.pdf on the congatec website for details on how to add OEM
default settings to the congatec Embedded BIOS.

7.2.2

OEM Boot Logo

This feature allows system designers to replace the standard text output displayed during POST with their own BIOS boot logo. Customized
BIOS development by congatec for OEM Boot Logo is no longer necessary because customers can easily perform this configuration by
themselves using the congatec system utility CGUTIL. See congatec application note AN8_Create_And_Add_Bootlogo.pdf on the congatec
website for details on how to add OEM boot logo to the congatec Embedded BIOS.

7.2.3

OEM POST Logo

This feature allows system designers to replace the congatec POST logo displayed in the upper left corner of the screen during BIOS POST
with their own BIOS POST logo. Use the congatec system utility CGUTIL 1.5.4 or later to replace/add the OEM POST logo.

«
...
38
39
40
41
42
...
»

Summary of Contents for 049000












































































Reviews:

No comments

Related manuals for 049000

Brand: Vantron Pages: 43

Brand: Lanner electronics Pages: 53

Brand: SOYO Pages: 47

WATTRATE 320-00-00011-01

Brand: Life Fitness Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands