Copyright
©
2018
congatec
GmbH
TSCOm17
30/75
6.1.3
Display Interface
The conga-TS370 supports the following:
•
up to three DP++
•
single- or dual-channel LVDS
•
VGA
•
three independent displays
Table 8 shows the supported display combinations and resolutions.
Table 8 Display Combinations and Resolution
Display 1
Display 2
Display 3
Interface Max. Resolution
Interface Max. Resolution
Interface
Max. Resolution
Option 1
DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp
DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp
4096x2160 @ 30 Hz, 24 bpp
4096x2160 @ 30 Hz, 24 bpp
4096x2160 @ 30 Hz, 24 bpp
Option 2
DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp
DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp LVDS or
eDP
1920x1200 @ 60 Hz (dual LVDS mode)
4096x2160 @ 30 Hz, 24 bpp
4096x2160 @ 30 Hz, 24 bpp
4096x2304 @ 60 Hz, 24 bpp
Option 3
DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp
DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp VGA
1920x1200 @ 60 Hz
4096x2160 @ 30 Hz, 24 bpp
4096x2160 @ 30 Hz, 24 bpp
Option 4
DP or
TMDS
4096x2304 @ 60 Hz, 24 bpp
VGA
1920x1200 @ 60 Hz
LVDS or
eDP
1920x1200 @ 60 Hz (dual LVDS mode)
4096x2160 @ 30 Hz, 24 bpp
4096x2304 @ 60 Hz, 24 bpp
Note
1. If VGA interface is enabled in the BIOS menu, the third DDI interface (DDI3) will support only TMDS.
2. To enable VGA, go to Advanced -> Graphics menu and change the Digital Display Interface 3 option.
