Copyright
©
2018
congatec
GmbH
TSCOm17
15/75
Note
1.
Only variants that feature the Intel CM246 support ECC memory
2.
Intel AMT support requires customized BIOS firmware
3.
DDI3 supports only TMDS if VGA is enabled in the BIOS setup menu
4.
The conga-TS370 does not currently support eSPI interface
2.2
Supported Operating Systems
The conga-TS370 supports the following operating systems.
•
Microsoft
®
Windows
®
10
•
Linux
Note
1. The processor supports only 64-bit operating systems.
2. The CSM (Compatibility Support Module) is disabled in the BIOS setup menu by default because we recommend to operate the system
in native UEFI mode.
2.3
Mechanical Dimensions
•
125.0 mm x 95.0 mm
•
Height approximately 18 or 21 mm (including heatspreader) depending on the carrier board connector that is used. If the 5 mm (height)
carrier board connector is used, then approximate overall height is 18 mm. If the 8 mm (height) carrier board connector is used, then
approximate overall height is 21 mm.
Heatspreader
All dimensions in millimeter
Module PCB
Carrier Board PCB
13.00
4.00
5.00
4.50
2.00±10%
7.00
18.00