Copyright
©
2021
congatec
GmbH
PA70m01
23/45
5
Connector Description
5.1
Power Supply Connectors
The conga-PA7 provides a DC power jack, a 2-pin power connector, and a USB Type-C
®
port to connect a power supply. Only connect one
power supply to power the conga-PA7. The required power supply voltage is specified in section 2.4 "Power Supply Voltage".
5.1.1
DC Power Jack
The conga-PA7 provides a standard DC power jack (X21), protected against short transient overvoltage and ESD. Optionally, the conga-PA7 can
provide a DC power jack with locking mechanism, including screw type connectors (assembly option).
Table 10 X21 Pinout
Pin
Description
Center Pin
+12V
Sleeve/Barrel
GND
Connector Type
X21: DC power jack, 5.5x2.5 mm diameter; For recommended power supplies, see Table 5
5.1.2
2-Pin Power Connector
The conga-PA7 provides a 2-pin power connector (X22), protected against short transient overvoltage and ESD. Alternatively, this connector
can be used as a +12V power output instead.
Table 11 X22 Pinout
Pin Description
1
+12V
2
GND
Connector Type
X22: 2x1 pins, 3.00 mm pitch (Molex 43650-0217); Possible Mating Connector: Molex 436450-0200
X21
1
2
X22
