Copyright
©
2017
congatec
GmbH
PA50m112
33/48
5.6.2
LVDS/eDP Header
The conga-PA5 provides an LVDS header (X3) via an eDP to LVDS bridge by default. It supports 18/24-bit single*/dual channel, selectable
backlight voltage, VESA color mappings, automatic panel detection and resolution up to 1920x1200 @60 Hz in dual LVDS mode. Optionally,
this header can provide eDP 1.3 with up to 3840x2160 @60 Hz (assembly option).
Table 18 X3 Pinout Description
Pin Signal
Pin Signal
1
GND
2
GND
3
LVDS_EVEN_TX3P / eDP_TX3P
4
LVDS_ODD_TX3P
5
LVDS_EVEN_TX3N / eDP_TX3N
6
LVDS_ODD_TX3N
7
GND
8
GND
9
LVDS_EVEN_TX2P / eDP_TX2P
10
LVDS_ODD_TX2P
11
LVDS_EVEN_TX2N / eDP_TX2N
12
LVDS_ODD_TX2N
13
GND
14
GND
15
LVDS_EVEN_TX1P / eDP_TX1P
16
LVDS_ODD_TX1P
17
LVDS_EVEN_TX1N / eDP_TX1N
18
LVDS_ODD_TX1N
19
GND
20
GND
21
LVDS_EVEN_TX0P / eDP_TX0P
22
LVDS_ODD_TX0P
23
LVDS_EVEN_TX0N / eDP_TX0N
24
LVDS_ODD_TX0N
25
GND
26
GND
27
LVDS_EVEN_CLKP / eDP_AUXP
28
LVDS_ODD_CLKP
29
LVDS_EVEN_CLKN / eDP_AUXN
30
LVDS_ODD_CLKN
31
GND
32
GND
33
CGBC_DDC_DAT
34
CGBC_DDC_CLK
35
VCC (+3.3V or +5V, fuse with 1A hold current)
36
VCC (+3.3V or +5V, fuse with 1A hold current)
37
GND
38
VCC (+3.3V or +5V, fuse with 1A hold current)
39
VDDEN
40
eDP_HPD#
Connector Type
X3: 40 pins, 1.00 mm pitch (Molex 501190-4017); Possible Mating Connector: Molex 501189-4010
Note
* For a single channel LVDS panel, use the ODD pins.
congatec offers an LVDS cable for 17" AUO Optronics G170EG01 V.1 panel only (see section Table 4 "Cables").
X3
