Copyright
©
2017
congatec
GmbH
PA50m112
28/48
Note
The battery has an adhesive tape on its shrinking tube. This tape enables the system integrator to adequately position the battery in the
system case. The functionality of adhesive tape is time limited if exposed to higher temperatures and harsh or vibrant environment. The
system integrator must ensure a stable position in this case.
5.2
High Definition Audio Header
The conga-PA5 provides an HD audio header (X6). The signals are routed from an HD audio codec (Cirrus Logic CS4207). Optionally, this
header can provide differential Line output (L1) and S/PDIF input.
Table 14 X6 Pinout Description
Pin Default Signal
Description
Optional Signal
1
MIC_L
Analog Microphone Input - Left Channel
2
GND_HDA
Audio Ground
3
MIC_R
Analog Microphone Input - Right Channel
4
+5V_AMP
+5V Power Supply (for external speaker amplifier; max. 500mA)
5
MIC_JD
Microphone Jack Detection
6
HP_R
Headphone Line Out - Right Channel
Line Out L1-
7
GND_HDA
Audio Ground
8
HP_L
Headphone Line Out - Left Channel
Line Out L1+
9
HP_JD
Headphone Jack Detection
10
+5V
+5V Power Supply (for S/PDIF optical transmitter)
11
GND
Digital Ground for S/PDIF
12
S/PDIF
S/PDIF Output (3.3V)
S/PDIF Input (3.3V)
Connector Type
X6: 6x2 pins, 2.0 mm pitch, box header
Pin 12
Pin 1
Pin 2
X6
