Assembly Instructions
By Confer Plastics
30” Patio Table
Stools shown - optional
Leisure Accents
Page 1: ...Assembly Instructions By Confer Plastics 30 Patio Table Stools shown optional Leisure Accents Leisure Accents ...
Page 2: ...that the opposite end will not be secure until it is inserted into the Table Top later in the assembly process Figure 3 2 While keeping the tongue and groove joint tight Figure 4 slide the groove in the second Half Leg over the tongue in the Full Leg Figure 5 If desired add weight to the legs before final assembly by removing the plugs located on the top edge of each leg pour in a small amout of s...
Page 3: ...the eight snap lugs into the corresponding holes in the underside of the table top as shown in Figure 7 Starting at one of the outermost lug positions strike the table top with a mallet as shown in Figure 8 Then proceed to hit the four inner lug locations and finally the outer three lug locations 30 Patio Table Leisure Accents Leisure Accents ...
Page 4: ...Made in the USA by CONFER PLASTICS INC 97 WITMER ROAD NORTH TONAWANDA N Y 14120 2421 www conferplastics com e mail patioproducts conferplastics com PRINTED IN USA LAPT 12 04 ...
