65
5.10
CONNECTING THE WATER SOFTENER WITH THE
SALT CONTAINER
The salt container is assembled as follows:
/
Push the filling hose (1) through the opening in the salt container and slide it over the connecting piece.
/
Push the suction hose (2) through the union nut and gasket as far as it will go and manually tighten it.
/
Push the connector (3a) of the electrode cable into the cable socket (3b) as far as it will go.
/
Slide the overflow hose (4) over the connecting piece.
Place the salt container below the water softener or next to it on the floor.
Fig. 7: Salt container assembly
When doing so, pay attention that both white marks correspond (correct polari-
ty)!
During assembly the connector and the cable socket may not come into contact
with water!
4
3b
3a
1
2
4
5
1
Filling hose (ø 6 mm)
4
Overflow hose
2
Suction hose (ø 4 mm)
5
Wastewater hose
3a/3b Electrode cable connector
Summary of Contents for CLEAR SOFT TWIN
