Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 53 of 81
Use the QR code (“click“ or “scan“), to watch our animation
Current Collector Tolerances
.
6.2.8
Installation instructions for systems with rail segment and/or end segment power feeds
If there is a need for an intermediate power feed at the start of a lane in addition or as an alternative to the standard power feed,
the lane must be divided accordingly.
Example:
If an 83 m long lane is to be fitted with an end segment power feed and an additional power feed in the middle of the lane, the lane
has to be divided as follows:
→
Divide the lane into 2 sections containing one conductor bar and final segment of 750 mm at their ends each.
Fig. 47: 83 m shuttle lane with extra power feed
Item
Name
1
Profile end feed
2
Fixed point
3
Section power feed
4
End section
A = 1st section
B = 2nd section
→
Replace the end cap on the end section of the 1
st
section A and the start segment of the 2
nd
section incl. the clamping part with
2x intermediate power feeds 081551-….
