Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 32 of 81
6
Installation
6.1
Safety
6.1.1
Personnel
→
The system must only be installed by specialist personnel!
→
The system has to be installed by at least 2 people.
Required protective equipment:
6.1.2
Safety instructions
WARNING!
Risk of death due to suspended loads!
Falling parts or uncontrolled swinging loads can lead to severe injury or even death.
→
Never step under suspended loads
→
Move loads only under supervision
→
Follow the specifications provided for the attachment points
→
Do not attach to projecting machine parts or to eyelets on installed components. Make sure the
connection elements are tightly fastened
→
Only use authorized lifting accessories and connection elements with sufficient load capacity
→
Discard torn or worn ropes or straps and replace with new ones
→
Do not attach ropes or straps to sharp corners and edges, and do not knot or twist them
→
Lower loads onto the ground before leaving the workplace
WARNING!
Risk of injury from improper installation!
Improper installation and incorrectly putting the system into operation can result in serious injury to
persons and/or property.
→
Before starting work, make sure there is sufficient space for assembly
→
Handle open, sharp-edges components carefully
→
Make sure the installation area is tidy and clean! Loosely stacked and/or components and tools that
are left lying around are a source of danger
→
Install components properly. Comply with the specified screw tightening torques
→
Secure components so that they cannot fall or fall over
