CONDTROL C14076, User Manual

Page: 11 / 104

11 11
User manual
LASER DISTANCE METER
EN
XP4 Pro CONDTROL
Stake out
Press and hold
during 2 seconds
Activate stake out function. Symbol
appears on the display.
Press or Set the value of distance А*.
Press Confirm the value of distance A.
Press or Set the value of distance В*.
Press Confirm the value of distance B.
Press
Start taking measurements. Laser beam is blinking.
Move the product slowly along the stake-out line.
Arrows and shown on the display indicate
in what direction it is required to move the product
in order to reach stake-out point. If sound signal is
on, when approaching the stake-out point to ±0,1
m the product emits sound signal. When reaching
the stake-out point to ±0,001 m symbol
appears on the display and sound signal tonality is
changed.
distance between the object and stake-out
point of last measured distance. This value will
increase after each next measurement by the
value of last taken measurement
– value of distance A
– value of distance В
– current distance to the next stake-out point
–