Condair Nortec EL-Series, Operation And Maintenance Manual

Page: 48 / 96

48 Operator Interface
2582954_D_EN_1811_Nortec-EL_OM Nortec EL
4.2.7.2 Service Menu
The Service menu lets you reset the cylinder when it is replaced, access the fault and maintenance
history lists and perform diagnostics. Refer to Figure 7 on page 25 . Refer to Table 5 on page 26 for the
menu structure.
Each tab under the Service menu is discussed below. The Service menu can also be accessed from the
maintenance and fault status area on the Home screen – refer to Figure 5 on page 15 .
Startup Code Tab
Note: This tab only appears if the humidifier is being operated for the very first time, or the startup code
has been enabled. Contact Condair to request a startup code, then enter it in the field described below.
– Startup Code: allows you to enter the startup code re -
quired to operate the humidifier.
General Service Tab
– Cylinder A Reset: allows you to reset the Cylinder Spent
service message after replacing cylinder A. A warning
message is displayed asking you to confirm the reset.
Options:
Yes or No
Factory setting:
No
– Cylinder B Reset: allows you to reset the Cylinder Spent
service message after replacing cylinder B. A warning
message is displayed asking you to confirm the reset.
Note: This setting appears only on units with dual steam
cylinders.
Options:
Yes
or
No
Factory setting:
No