Concoa MEDICAL INTELLISWITCH 571 Series, Manual, Page: 21 / 28

21
Figure 17
Table 4
Bullet Item Description
1 Email Enable
The radio buttons are use to enable or disable the EMAIL2
function. Clicking on the radio button works the same as in other
radio buttons in the EDIT screen
2 To:
This is the location to enter the email address of any recipients the
user wishes to receive notification of an “alarm”. If more the user
wishes to send to more than one recipient separate the email
addresses by a semicolon.
3 CC:
This location holds the email address for anyone the user wishes
to copy in the case of an “alarm”.
4 From:
This location holds the email address of the person or system*
sending the email.
5 SET button
Clicking this button will save the parameters that have been
entered.
6 TEST button
This button allows the user to test the email function. Clicking this
button should send out a email message to the name entered in
the “To:” and “cc:” boxes
7 CANCEL button
Clicking this button will return the IWS to the EDIT screen. If there
is information entered t
hat has been saved by clicking the “SET”
button those values will show in the boxes the next time the
EMAIL1 screen is opened. If the “CANCEL” key is used before
the “SET” button is used, nothing will be saved.
8 CONFIG button
This button brings the user to the system configuration screen.
The system configuration screen is used to configure the
IntelliSwitch so that it can operate its email function.