32
NORMAL
O2 20.9%
INVERT
O2 20.9%
..Format Relay 1 CO2…
O2 20.9%
..Format Relay 2 O2…
O2 20.9%
NORMAL
O2 20.9%
INVERT
O2 20.9%
This is the menu at which to adjust the CO2 alarm relay state on the Dual O2/CO2
monitor.
To change this value, push the joystick right to display the relay state. The display will
indicate
NORMAL.
This is the factory default state for the alarm relay. Pushing the
joystick down will change the relay state from NORMAL to INVERT.
NOTE: When the CO2 relay state is changed to INVERT, the internal horn and
orange alarm LED will illuminate.
After entering the relay state push the joystick left to enter the setting. The display will
scroll the following:
From this main menu, pushing the joystick down will select the next sub menu to adjust
the O2 alarm relay state. The digital display will scroll the following:
To change this value, push the joystick right to display the relay state. The display will
indicate
NORMAL.
This is the factory default state for the alarm relay. Pushing the
joystick down will change the relay state from NORMAL to INVERT.
NOTE: When the O2 relay state is changed to INVERT, the internal horn and red alarm
LED will illuminate.