Concoa 529 5310 Installation And Operation Instruction Manual Download Page 15

-15-

Warranty Information

This equipment is sold by CONTROLS CORPORATION OF AMERICA under the warranties set forth in the 
following paragraphs. Such warranties are extended only with respect to the purchase of this equipment directly 
from CONTROLS CORPORATION OF AMERICA or its Authorized Distributors as new merchandise and are 
extended to the first Buyer thereof other than for the purpose of resale.

For a period of one (1) year from the date of original delivery (90 days in corrosive service) to Buyer or to Buyer’s 
order, this equipment is warrantied to be free from functional defects in materials and workmanship and to conform 
to the description of this equipment contained in this manual and any accompanying labels and/or inserts, provided 
that the same is properly operated under conditions of normal use and that regular periodic maintenance and service 
is performed or replacements made in accordance with the instructions provided. The foregoing warranties shall 
not apply if the equipment has been repaired: other than by CONTROLS CORPORATION OF AMERICA or a 
designated service facility or in accordance with written instructions provided by CONTROLS CORPORATION OF 
AMERICA, or altered by anyone other than CONTROLS CORPORATION OF AMERICA, or if the equipment 
has been subject to abuse, misuse, negligence or accident.

CONTROLS CORPORATION OF AMERICA’s sole and exclusive obligation and Buyer’s sole and exclusive remedy 
under the above warranties is limited to repairing or replacing, free of charge, at CONTROLS CORPORATION OF 
AMERICA’s option, the equipment or part, which is reported to its Authorized Distributor from whom purchased, 
and which if so advised, is returned with a statement of the observed deficiency, and proof of purchase of equipment 
or part not later than seven (7) days after the expiration date of the applicable warranty, to the nearest designated 
service facility during normal business hours, transportation charges prepaid, and which upon examination, is found 
not to comply with the above warranties. Return trip transportation charges for the equipment or part shall be paid 
by Buyer.

CONTROLS CORPORATION OF AMERICA SHALL NOT BE OTHERWISE LIABLE FOR ANY DAMAGES 
INCLUDING BUT NOT LIMITED TO: INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, OR 
SPECIAL  DAMAGES, WHETHER  SUCH  DAMAGES  RESULT  FROM  NEGLIGENCE,  BREACH  OF 
WARRANTY OR OTHERWISE.

THERE ARE NO EXPRESS OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE WARRANTIES 
HEREINABOVE SET FORTH. CONTROLS CORPORATION OF AMERICA MAKES NO WARRANTY 
OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE WITH  RESPECT  TO  THE 
EQUIPMENT OR PARTS THEREOF.

Summary of Contents for 529 5310

















Reviews: