Concept2 OZ 4022, Manual

Page: 90 / 104

90
OZ4022
CZ
SETTING THE TEMPERATURE
You can customize the temperature range for any function. In table 1 you will find the pre-set temperature values. You
can change the temperature by 5°C steps by pressing the button „+“ or „-“. The last temperature set for the function is
activated automatically when you turn on the appliance. The selected temperature will show on the display.
Temperature °C*
40 60 60
45 65 65
50 70 70
55 75 75
60 80 80
Table 1 | * Approximate temperature values, as measured in the middle of the warming drawer when empty.
Setting the duration
The appliance is preset for continuous heating. You can control how long it is on by pressing the button „+“ or „-“.
The capacity of the appliance
The number of dishes that can be inserted into the drawer depends on the size and weight of the dishware. Do not
overload the drawer!
Maximum load for the drawer is 25 kg.
The drawer should be partly closed if the weight of
the dishware is just below the maximum load capacity of the drawer.
Here are only suggestions for preheating the dishware.
6 pieces of large plates ø 26 cm
6 pieces of soup plates ø 23 cm
6 pieces of small plates ø 19 cm
1 piece of oval plate ø 32 cm
1 piece of medium serving bowl ø 16 cm
1 piece of small serving bowl ø 13 cm
KEEPING FOOD WARM
Type of food Cover the dish
Recommended
temperature [°C]
Steak (rare) YES 65
Roasted meat YES 80
Roast YES 75
Stew YES 80
EN