Concept2 OPK 4190, Manual

Page: 29 / 48

EN
Follow the subsequent installation instructions:
0OUIFXBMMCFIJOEUIFIPUQMBUFNBSLUIFNJOJNVNJOTUBMMBUJPOIFJHIU NNGPS
FMFDUSJDBOENNGPSHBTIPUQMBUFTBTTIPXOJO'JH
.BSLUIFQPTJUJPOPGUIFDFOUSFPGUIFIPUQMBUFXJUIBWFSUJDBMMJOF
3. Put the appliance on the wall at the required height (650 mm above the electrical
BOENNBCPWFHBTDPPLJOHQMBUFT.BSLUIFQPTJUJPOPGUIFIPMFTGPSGBTUFOJOH
in the wall.
%SJMMIPMFTBOEGBTUFOUIFBQQMJBODFXJUIVTFPGUIFEFMJWFSFEEPXFMTBOETDSFXT
5IFFYBDUTFUUJOHPGUIFBQQMJBODFJOIPSJ[POUBMQPTJUJPONBZCFQFSGPSNFEVTJOH
the setting screws (Fig. 5 and 6).
'PSUIFNPEFPGFYIBVTUJOHDPOOFDUUIFPVUQVUPQFOJOHPGUIFWFOUJMBUJOHGBOXJUI
UIFIPMFJOUIFXBMMCZUIFnFYJCMFQJQJOH*GOFDFTTBSZVTFUIFEJBNFUFSBEBQUFS
(150/120 mm).
'PSUIFBJSJOHNPEFMFBWFUIFGBOPVUQVUPQFOJOHPQFOTPUIBUUIFBJSDBOnPXCBDL
into the room.
/PUF3FEVDUJPOPGUIFEJBNFUFS NNJTOPUQBSUPGUIFEFMJWFSZ
1VU CPUI DIJNOFZ DPWFST PO UIF CPEZ PG UIF BQQMJBODF 4MJEF UIF VQQFS DIJNOFZ
DPWFSPVUUPUIFSFRVJSFEIFJHIUBOENBSLUIFIFJHIUPGUIFPQFOJOHPOUIFXBMMGPS
UIFXBMMCSBDLFUPGUIFVQQFSDPWFS3FNPWFCPUIDIJNOFZDPWFST
-PDBUFUIFXBMMCSBDLFUPGUIFVQQFSDIJNOFZDPWFSUPUIFNBSLFEIFJHIUBOENBSL
on the wall its fixing holes.
%SJMMUIFIPMFTBOEmYUIFXBMMCSBDLFUPGUIFVQQFSDIJNOFZDPWFS
10. Mount and screw the lower and upper chimney covers.
11. Plug the supply cable into the wall outlet.
Disassembly
1SJPSUPEJTBTTFNCMZEJTDPOOFDUUIFQPXFSDBCMFGSPNUIFXBMMPVUMFUGPMMPXUIFTUFQTJOSFWFSTFUPSFNPWFTJOHMF
QBSUTPGUIFBQQMJBODF
TROUBLESHOOTING
Fig. 5 Fig. 6
Problem Cause Resolving
The motor is not running.
The plug is inserted into the socket
JODPSSFDUMZPSJOTVöDJFOUMZ
Check the plug connection.
The socket is not supplied with electricity.
Check to make sure voltage is present, e.g.
by using another appliance.
Fig. 4
2 7 OPK 4190
E N