Concept2 MNV2345, Manual

Page: 149 / 164

149
EN
MNV2345
Cleaning the spray arms
It is necessary to clean the spray arms regularly. Calcium and dirt may block nozzles and bearings of the spray arms.
• Check the outlet nozzle of the spray arms whether they
are blocked by food residues or not.
• If it is necessary, unscrew and remove the spray arms
(Fig. 11). Wash them under running water and then
place them back.
• To dismantle the upper arm, hold the nut, turn the arm
clockwise and remove it.
• To dismantle the lower arm, remove the arm by lifting
it upwards.
• Wash each spray arm in warm soapy water. To clean the
nozzles use a fine brush.
• Install the arms back after cleaning.