Quick Setup Guide
IP HIGH SPEED DOME
VHSDIR-680EXT-IP
VHSDIR-970EXTL-IP
VHSDIR-930EXT-IP3M
PRECAUTIONS
SPECIAL ANNOUNCEMENT
1
PRODUCT EXAMINATION
2
DEVICE STRUCTURE
Please be sure to review and fully understand this document before using
this device, and strictly observe the rules within this document when using
this device. If you install this device in public places, provide a notification
such as "You have entered an area of electronic surveillance" in a clearly
visible location. Failure to correctly use electrical products may cause fire
and severe injuries.
All complete products sold by the manufacturer are delivered along
with nameplates, and accessories after strict inspection. The
manufacturer shall not be held responsible for counterfeit products.
The manufacturer will update this manual according to product
function enhancement or changes and regularly update the software
and hardware described in this manual. Updated information may be
added to new versions of this manual without prior notice.
This manual may contain misprints, inaccurate technical information,
or product function and operation descriptions that are slightly
inconsistent with the actual product.
This manual is only for reference and does not ensure that the
information is totally consistent with the actual product. For
consistency, refer the actual product.
Different products may have different multi-head cables, please refer to
the actual product.
Different products may
have different multi-head
cabbles, please refer to
the actual product.
2.1 Device Ports
Figure 2.1 Multi-head cable
Figure 2-2 Dimensions(Unit:mm)
For more information, please refer to included USB and website.
this device. Otherwise, the service life of the image sensor may be
shortened.
If this device is installed in places where thunder and lightning
frequently occur, ground the device nearby to discharge high energy
such as lightning strikes in order to prevent device damage.
Avoid heavy loads, intensive shakes, and soaking to prevent damage
during transportation and storage. The warranty does not cover any
device damage that is caused during secondary packaging and
transportation after the original packaging is opened.
Protect this device from falls and intensive strikes, keep the device
away from magnetic field interference, and do not install the device in
places with shaking surfaces or subject to shocks.
Clean the device with a soft, dry cloth. For stubborn dirt, dip the cloth
into slightly neutral cleanser, gently wipe the dirt with the cloth, and
then dry the device.
Do not jam the ventilation opening. Follow the installation instructions
provided in this document when installing the device.
Keep the device away from heat sources such as radiators, electric
heaters, or other heat equipment.
Keep the device away from moist, dusty, extremely hot or cold places,
or places with strong electric radiation.
If the device is installed outdoors, take insect and moisture-proof
measures to avoid circuit board corrosion that can affect monitoring.
Remove the power plug if the device is idle for a long period of time.
Before unpacking, check whether the fragile sticker is damaged. If the
fragile sticker is damaged, contact customer services or sales
personnel. The manufacturer shall not be held responsible for any
artificial damage of the fragile sticker.
Open the package, check the appearance of product for any
obvious damage, and confirm the item for t 1-1 is consistent.
Table 1-1 Packing list
Component
Quantity
Remark
High Speed Dome Camera
Quick Setup Guide
USB
No.4 Hex Wrench
Slotted Screwdriver
Terminal Block
A Pair of gloves
Power Adapter
Wall Mount Bracket
Bracket Connector
Stainless hexagon screw M5 x 12mm
1
1
1
1
1
2
1
1
1
2
4
Optional
Optional
Alerts you to moderate dangers which, if not
avoided, may cause minor or moderate injuries.
Alerts you to risks, of which neglecting may cause
device damage, data loss, device performance
deterioration, or unpredictable results.
Provides additional information.
WARNING
CAUTION
CAUTION
NOTES
NOTES
NOTES
Different products may have different multi-head cabbles, please refer to
the actual product.
2.2 Product Dimensions
NOTES
WARNING
Strictly observe installation requirements when installing the device. The
manufacturer shall not be held responsible for device damage caused
by users' non-conformance to these requirements.
Strictly conform to local electrical safety standards and use power
adapters that are marked with the LPS standard when installing and
using this device. Otherwise, this device may be damaged.
Use accessories delivered with this device. The voltage must meet input
voltage requirements for this device.
If this device is installed in places with unsteady voltage, ground this
device to discharge high energy such as electrical surges in order to
prevent the power supply from burning out.
When this device is in use, ensure that no water or any liquid flows into
the device. If water or liquid unexpectedly flows into the device,
immediately power off the device and disconnect all cables (such as
power cables and network cables) from this device.
Do not focus strong light (such as lighted bulbs or sunlight) on
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Au
dio I
np
ut
Au
dio O
utp
ut
4
3
2
8
7
6
5
1
Table 2.1 Multi-head cable description
Table 2.1 Multi-head cable description continued
B rown
Alarm output channel 1
Alarm input channel 3
Alarm input channel 4
Alarm input channel 5
Alarm input channel 2
Alarm input channel 1
Alarm output channel 2
Alarm output channel 1
common terminal
Alarm output channel 1
common terminal
R ed/
B lack
B rown/
B lack
R ed
1
ID
Core
Orange
Yellow/
B lack
Orange/
B lack
Yellow
Green
F unction
Description
Alarm input and alarm
output channels.
ø9
Ø205
332
172
75
B lue
B lue/
B lack
Alarm input channel
7
Alarm input channel
common terminal
Green/
B lack
Alarm input channel
6
Description
ID
Core
F unction
N/A
Network port
R ed taped
core
Audio output
2
4
3
5 White
taped core
Audio input
Red core
Black core
AC 24V power
supply
B NC Video
6
7
8
Grounding wire
Yellow
Green
RS 485-
RS 485+
-
N/A
N/A
Sends an analog video signal.
You can connect the camera
to a TV monitor through this
port to view the analog video.
Connects to a standard
Ethernet cable.
Connects to an externalaudio
device such as a speaker.
Receives an analog audio
signal from devices such as a
microphone
Supply power for device and
heater.
Connects an external Pan
Tilt Zoom (PTZ controller).
