VHDIPL-V3 User Manual - October 2017
Purpose
This document describes the hardware installation, basic operation, network access, network confi guration, routine maintenance, fault analysis, and troubleshooting
of the Network Video Recorder (NVR).
Intended Audience
This document is intended for:
•
Technical support engineers
•
Maintenance engineers
WARNING
Alerts you to monitor danger, which if not avoided, may cause minor or moderate injuries.
CAUTION
Alerts you to risks. Neglecting these risks may cause device damage, data loss, device performance
deterioration, or unpredictable results.
NOTE
Provides noteworthy information.
Important Statement
Users are required to enable and maintain the lawful interception interfaces of video surveillance products in strict compliance with relevant laws and regulations.
Installation of surveillance devices in an offi ce area by an enterprise or individual to monitor employee behaviour and working effi ciency outside the permitted scope
of the local law and the use of video surveillance devices for eavesdropping or other illegal purposes constitute behaviours of unlawful interception.
WARNING
Please strictly observe and adhere to installation requirements when installing the device; The manufacturer will not be held responsible for device damage caused
by users’ non-compliance with these requirements.
Please strictly conform to local electrical safety standards and use power adapters that are marked with the local standard when installing and using this device.
Please use the accessories delivered with this device, voltage must meet input voltage requirements for this device.
If this device is installed in places with inconsistent voltage or where lightning storms frequently occur, ensure the device is grounded to discharge any high energy
such as electrical surges, which will help prevent damage.
When this device is in use, ensure that no water or other liquids enter the device. If liquid unexpectedly enters the device, immediately turn off the power and
disconnect all cables (such as power cables, video cables and network cables) from the device.
CAUTION
Handle with care to prevent damage during transportation and storage. The warranty does not cover any device damage that is caused during transportation after
the original packaging is removed.
Ensure the device is not subject to falls or direct strikes
Keep the device away from electromagnetic interference, and do not install the device in places with unstable surfaces. Doing so may cause connected cables to
become loose and cause the device to malfunction.
Clean the device with a soft, dry cloth. For stubborn dirt, use a neutral cleanser to dampen the cloth then gently wipe the dirt away and dry the area.
Do not block the ventilation to the NVR; this is required to cool the NVR. Follow the installation instructions provided in this document when installing the device.
Do not install near heat sources such as radiators, electric space heaters, or other heat-producing equipment.
Do not install device near moist, dusty, extremely hot or cold environments or places that are subject to radiation.
If the device is installed outdoors, take measures to ensure insects and moisture cannot enter the device to avoid circuit board corrosion, which in turn will have a
negative affect monitoring.
If the NVR is idle for an extended period of time, remove the power plug.
Special Announcement
All complete products sold by the manufacturer are delivered along with nameplates, quick setup guides, and accessories after strict inspection. The manufacturer
will not be held responsible for counterfeit products.
The manufacturer may update this manual according to product feature enhancements or changes at regular intervals to update the software and hardware
described in this manual without prior notice, the updated information will be added in later versions of the manual.
NOTE
For more information, please refer product web pages.