Network Video Recorder(NVR)
5
Quick Setup
Issue V1.1 (2014-07-15)
11
!
Synchronize the time of the network cameras with NVR. You can select the manual
mode or automatic mode.
To set the time manually, click
to open the NVR time configuration window.
To synchronize the connected cameras with the NVR, set 'Sync Camera Time' to
on.
Area 2: NVR Network Configuration
!
The default IP address of the NVR is: Network1: 192.168.0.121; Network2:
192.168.1.121.
!
The basic network section allows configuration of the IP address, subnet mask,
default gateway, DNS address and other parameters. Real-time display of the
network connection status and speed
!
Network 2: Is the function that enables the private network for cameras, creating a
new IP segment for a local network. By default, the function is enabled.
!
The VHDIPL supports a maximum of 32 IP cameras and the maximum recording
rate of 144 Mbps. If the total rate exceeds the value, the NVR may not steadily and
experience video loss
!
For details of parameters, see Chapter 1 "Specifications".
The private network for cameras includes only IP cameras and NVRs and does not include
other network devices.
After the function of private network for cameras is enabled, the NVR will perform the
following operation:
!
Enable the DHCP service and automatically assign IP addresses to IP cameras (Note: The
DHCP function needs to be enabled within the IP cameras aswell).
!
Automatically search for IP cameras in the local network.
!
Will automatically add IP cameras found on the local network and set 7*24-hour
recording.
Area 3
: Hard disk management
Summary of Contents for VHDIPL-32
Page 1: ...VHDIPL 32 32 CHANNEL NVR IP SURVEILLANCE USER MANUAL...
Page 6: ......