IP CAMERA QUICK START GUIDE
1. CONTENTS
Packaging Contents
Technical Documents
IP Camera x1
Allen Key x1
Quick Start Guide x1
RJ45 Waterproofing Cap x1
Fitting Screws x4
Analogue SVO Cable x1
(Except CVP9328DNIR-IP2M-Z)
Wall Plugs x4
Terminal Blocks x2
(Except CVP9328DNIR-IP2M-Z)
2. INSTALLATION
1. Open Packaging
Open packaging, remove camera, and set aside the
included accessories. Use the included allen key to
loosen the security screw on the side of the camera,
then unscrew the base ring to separate the camera
and middle ring from the base.
2. Drill Mounting Holes
Attach the included mounting template on the
mounting surface and drill holes according to the
template. Insert included wall plugs into the holes.
Place the base over the holes and use the supplied
fitting screws to secure the base to the surface.
3. Mount the Camera
Insert cables through the mounting hole. Position the
camera, middle ring, and base ring over the base and
screw the base ring to tighten in position.
4. Adjust Camera Positioning
Adjust the camera position as needed and re-tighten
the base locking screw.
CAMERA
BASE
RING
MIDDLE
RING
BASE
FIXING TO A WALL
Summary of Contents for CVP9328DNIR-IP2M-Z
Page 8: ......
