ON SCREEN DISPLAY (OSD)
The power indicator LEDs display the power supply being fed into the camera and whether it
is too high, low or correct.
1. "PO": Red LED - Voltage is too high
2. "PN": Green LED - Voltage is correct
3. "PL": Yellow LED - Voltage is too low
4. Extra video out and OSD Connector - Attach your Video test monitor with the service video
cable enclosed in your camera box. The camera footage will appear on your test monitor
and zoom/focus adjustments can be carried out as the installation requires.
5. Camera ID Setup
ID number of camera is set using binary numbers.
The example is shown to the right shows ID 1
The Service Video Out panel contains a power indicator and test monitor connection for
ease of adjusting the camera settings during installation.
1
2
3
TEST MONITOR
OSD OUTPUT CABLE
L
U
D
R
ENT
1) Press “U” to navigate upwards
2) Press “D” to navigate downwards
3) Press “L” to navigate left
4) Press “R” to navigate right
5) Press “ENT” to open menu/sub-menu
OSD Controller
L
U
D
R
ENT
PIN
1 2 3 4 5 6 7 8
ID Value 1 2 4 8 16 32 64 128
ON
1
2
3
4
5
6
7
8
PO
PN
PL
ON
1 2 3 4 5 6 7 8
4
5
All manuals and user guides at all-guides.com
all-guides.com