BNC CONNECTOR
Troubleshooting
Ensure all power and cable connections are correct with the Camera, DVR and Test monitor
or Telemetry devices if used.
Power Voltage Check - Remove the OSD cover to see if the green correct power LED is lit. If
there red LED is lit the power voltage is too high. If the yellow LED is lit the power voltage is
not high enough. If there are no LEDs lit there is no power getting to the camera
If all power and cable connections are correct and the camera picture can not be produced or
configured then contact your supplier for technical support.
DIMENSIONS
302.2mm(11.89”)
40mm(1.57”)
85mm(3.35”)
97mm(3.85”)
All manuals and user guides at all-guides.com