background image

IMPORTANT SAFETY
INSTRUCTIONS

When using your telephone equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the

product.

3. Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water, for example, near

a bath tub, wash bowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool.

5. Do not place this product may fall causing serious

damage to the product.

6. Slots and openings in the cabinet and the back or bottom

are provided for ventilation, to protect from overheating.
These openings must not be blocked or covered. The
openings should never be blocked by placing the product
on the bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in
installation unless proper ventilation is provided.

7. Never push objects of any kind into this product

through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a
risk of fire or electric shock. Never spill liquid of any
kind on the product.

8. To reduce the risk of electric shock, do not

disassemble this product, but take it to a qualified
serviceman when some service or repair work is
required. Opening or removing covers may expose
you to dangerous voltages or other risks. Incorrect
reassembly can cause  electric shock when the
appliance is subsequently used.

9. Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the
following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following

the operating instructions. Adjust only those controls
that are covered by the operating instructions
because improper adjustment of other controls may
result in damage and will often require extensive
work by a qualified technician to restore the product
to normal operation.

E. If the product has been dropped or the cabinet has

been damaged.

F. If the product exhibits a distinct change in

performance.

10. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote
risk  of electric shock from lightning.

11. Do not use the telephone to report a gas leak in the

vicinity of the leak.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless

the jack is specifically designed for wet locations.

3. Never touch uninsulated telephone wire or terminals

unless the telephone line has been disconnected at
the network interface.

4. Use caution when installing or modifying telephone

lines.

NOTE: Refer to “FCC Requirements” section before
connection to telephone line.

In addition to the handset and telephone base, each
carton contains the following accessories:

• One (1) 7 ft. fully modular telephone line cord

(long, straight cord)

• One (1) 7 ft. fully modular coil cord
• Owner’s manual
• One (1) 7-inch fully modular telephone line cord

(short, straight cord)

TELEPHONE  CONTROLS  AND  FEATURES

1. Earpiece
2. Memory Index
3. Microphone
4. Fully Modular Handset

Cord

5. Mute Key
6. Flash Key
7. Redial Key

8. Dial Tone Reset Key

(Hook Switch)

9. Ringer Off/Low/High

Switch

10.Tone or Pulse Switch
11. Keypad with illuminated

keys

12.Receiver Volume Control
13.Off Hook Handset Rest

Important  Notice

Your CONAIRPHONE

TM

 telephone will operate on all

systems, true tone or rotary.
1. If your home is wired for rotary service, move switch

to pulse position (P).

2. If your home is wired for tone service, move switch to

tone position (T).

3. If you are unsure of the type of service you have,

ask your local telephone company.

2

1

3

Diagram A

Summary of Contents for SW224









Reviews: