background image

IMPORTANT SAFETY 

INSTRUCTIONS

When using electrical appliances, especially when 
children are present, basic safety precautions should 
always be followed, including the following:

READ ALL INSTRUCTIONS 

BEFORE USING

KEEP AWAY FROM WATER

DANGER

 —

 Any appliance is electri-

cally live even when the switch is off. To reduce 
the risk of death by electric shock:

1. Always unplug appliance immediately 
after using.

2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can 
fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other 
liquid.
5. If an appliance falls into water, unplug it im-
mediately. 

Do not reach into the water.

WARNING

 —

 To reduce the risk of 

burns, electrocution, fi re, or injury to persons:

1. This appliance should never be left unat-
tended when plugged in. 
2. Do not pull, twist, or wrap line cord around 
appliance.

3. This appliance should not be used by, on or near 
children or individuals with certain disabilities.
4. Use this appliance only for its intended use, as 
described in this manual. Do not use attachments 
not recommended by the manufacturer. 

5. Never operate this appliance if it has a dam-
aged cord or plug, if it is not working prop-
erly or if it has been dropped or damaged, or 
dropped into water. Return the appliance to 
an authorized service center for examination 
and repair.

6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any open-
ing or hose.
9. Do not use outdoors or operate where aerosol 
(spray) products are being used or where oxygen 
is being administered.
10. Unit is hot when in use. Do not let eyes or 
bare skin touch heated surfaces.

11. Do not place the heated unit directly on 
any surface or on the appliance cord while it 
is hot or plugged in. 

12. Never block the air openings of the appliance 
or place on a soft surface, such as a bed, couch, 
or towel, where the air openings may be blocked. 
Keep the air openings free of lint, hair, and the 
like. Unplug before storing.
13. Do not use an extension cord with this 
appliance. 
14. Do not touch hot surfaces of the appliance. 
Use handles or knobs.
15. Before plugging in read the information about 
dual voltage contained in the instruction section 
of this manual.
16. Do not attempt to touch the housing of your 
appliance near the straightening plates as it is 
hot when in use.
17. Do not use with a voltage converter.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This straightening iron is intended for house-
hold use. This unit is designed to operate at 
120/240 volts AC. Use on Alternating Current 
(50/60 hertz) only. 
This appliance has a polarized plug (one blade is 
wider than the other). As a safety feature, this plug 
will fi t in a polarized outlet only one way. If the plug 
does not fi t fully in the outlet, reverse the plug. If 
it still does not fi t, contact a qualifi ed electrician. 
Do not attempt to defeat this safety feature.

DUAL VOLTAGE

This straightening iron will automatically adjust 
to the proper voltage. Use an adapter plug with 
correct confi guration, prior to use in outlet.

TO STRAIGHTEN HAIR

Hair should be clean and completely dried before 
using the straightening iron. Plug the iron into an 
electrical outlet. Turn on unit. The power indica-
tor light should become illuminated. Allow unit 
to heat up for several minutes. 

WARNING: The straightening iron’s plates will 
get very hot within a few seconds and should 
not be placed in contact with the skin after 
the straightening iron has been turned on. 

GETTING STARTED

The straightening iron’s 3 high heat temperature 
settings and Instant Heat technology combine to 
provide styling versatility for all hair textures. If 
you have fi ne hair, a low temperature will provide 
the best results. If you have thick, wavy or hard-
to-straighten hair, keep the heat setting high. You 
can vary the straightening iron’s temperature 
according to your particular need!

STRAIGHTENING BASICS

1. Plug the straightening iron cord into any house-
hold outlet (120/240V, red light to go on). Press 
ON button. The iron will heat up very quickly. The 
red indicator light will stop blinking and remain 
on when the iron is ready to use. To turn off, press 
OFF button (red light will go off). Never leave your 
straightening iron on and unattended. 

However, 

should you fail to turn the unit off, it will shut 
itself off automatically within 72 minutes.

2. Start with a hair section that is 2” wide and no 
more than 1/2” thick. Open the iron and place a 
hair section between the two hot plates, close to 
the scalp. Trap hair between the plates by fi rmly 
squeezing the handles together. While maintain-
ing the tension, slowly pull the unit down along 
the hair section toward the end of hair. For best 
results, use a light styling lotion before blow-dry-
ing hair. At the end of hair section, release the 
pressure on the handle and allow the hair section 
to slide out. Repeat process on additional sections 
of hair until you achieve the hair style you desire. 
It may be necessary to repeat process on certain 
areas, depending on the texture of your hair.
Some experience is necessary when learning to 
use this straightening iron. After using iron several 
times, you will learn the ideal way to straighten and 
style your hair easily. 

STYLING WITH EASY-GLIDE TITANIUM-

TOURMALINE CERAMIC COATED PLATES

The plates of this premium straightening iron 
are coated with a combination of the best ma-
terials for styling. A fusion of titanium, tourma-
line and ceramic evenly distributes heat to 
gently style and protect hair from damaging 
hot spots. When heated, tourmaline naturally 
emits clouds of negatively charged ions that 
eliminate fl yaways and frizzies and leave hair 
silky smooth and shiny. 
Hair glides easily over the surface of these ultra 
smooth plates.  As you straighten each strand, 
you’ll achieve a salon-perfect fi nish. 
Plates are exceptionally easy to clean, and you’ll 
discover this combination of technologies leaves 
your hair silky smooth.

USING INSTANT HEAT, THE 3 HIGH HEAT 

TEMPERATURE SETTINGS AND UNIFORM 

HEAT RECOVERY SYSTEM 

This straightening iron features Conair’s Instant 
Heat technology. 
Within this Instant Heat technology there are 3 
temperature settings for every type of hair, from 
the fi nest to the curliest and most resistant. Se-
lect the temperature range that’s suitable for your 
hair type to help you create the look you want. 

And that’s not all. Conair’s professional salon 
standards of engineering provide you with a Uni-
form Heat Recovery System that maintains the 
straightening iron at a constant temperature. 
There is a constant surge of power to ensure that 
heat is continuously delivered for optimal styling 
results, unlike other units which lose heat during 
use. This provides consistent styling power so 
that every strand of your hair is set with the same 
level of heat and comes out the same way for a 
perfect fi nish.

REMOVABLE SILICONE 

DEEP SHINE ATTACHMENT

Your straightening iron includes a removable 
silicone deep shine attachment. This attachment 
will help to provide tension and guide your hair 
as you use the straightening iron. It also eliminates 
any gaps, creating silky, smooth strands with 
extra shine. To remove or attach the silicone strip, 
turn unit off and allow unit to cool. Hold unit 
fi rmly with one hand; with your other hand, slide 
silicone strip away from the iron to detach it. 
When attaching the silicone strip, align it with 
the slot on the side of the iron and slide silicone 
strip into position. Make sure the silicone strip 
securely locks into position.

 

Temp. Setting 

Hair Type

 Low  

Delicate, thin, easy-to-straighten hair

 Medium  

Average to thick or treated hair

 High 

Thick, wavy or hard-to-straighten hair

Temperature Setting Guide

08NP10404_CS64_ib.indd   1

08NP10404_CS64_ib.indd   1

11/25/08   1:50:17 PM

11/25/08   1:50:17 PM

Reviews: