®
hot
clips
Instruction & Styling Guide
Model CHV26HCX
For your safety and continued
enjoyment of this product, always read
the instruction book carefully before using.
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER –
To reduce the risk of
electrocution:
1.
Always unplug this appliance
immediately after using.
2. Do not use while bathing or in the
shower.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or
other liquids.
5.
Do not reach for an appliance that has
fallen into water. Unplug immediately.
WARNING –
To reduce the risk
of burns, electrocution, fire, or injury to
persons:
1.
An appliance should never be left
unattended when plugged in.
2.
Do not pull, twist or wrap line cord
around appliance.
3. Close supervision is necessary when
this appliance is used by, on, or near
children or individuals with certain
disabilities.
4. Use this appliance only for its intended
use as described in the manual. Do not
use attachments not recommended by
Conair.
5.
Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, or dropped
into water. Return the appliance to
an authorized service center for
examination and repair.
6. Keep the cord away from heated
surfaces.
7. Never block the air openings of the
appliance or place it on a soft surface,
such as a bed or couch, where the air
openings may be blocked. Keep the air
openings free of lint, hair, and the like.
8. Never use while sleeping.
9. Never drop or insert any object into any
opening or hose.
10. Do not use outdoors or operate where
aerosol (spray) products are being used
or where oxygen is being administered.
11. Do not use an extension cord with this
appliance.
12. Do not touch metal “radiator” strips that
hold rollers, as they will be hot.
13. Do not touch the metal rails that heat
the clips.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
How to operate your hairsetter with
heated clips:
1. Place hairsetter on a firm, flat surface. With
the lid closed, plug cord into outlet. This
appliance has a polarized plug (one blade is
wider than the other). As a safety feature,
this plug will fit into a polarized outlet only
one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
2. Once plugged in, the red light will go
on and the rollers will heat up quickly.
Rollers are ready to use when the ready
dot on the roller turns transparent white.
(Please refer to HOW TO CURL YOUR HAIR
for further instruction.)
3. Allow rollers and clips to heat with lid
closed, as this will provide the fastest,
most efficient heat-up. Once the rollers
reach your desired temperature, you can
begin setting your hair.
4. Hair should be clean and dry or slightly
damp – never wet – when setting. For
tighter curls, allow rollers to heat longer
at a higher temperature.
5. Never leave your hairsetter on and
unattended. Always unplug the hairsetter
when not in use. Allow the hairsetter
to cool down after use, and store in a
safe place.
USER MAINTENANCE
Your hairsetter is designed for household
use and is virtually maintenance free. This
product represents the highest standards of
workmanship and engineering research.
If cleaning becomes necessary, discon-
nect the appliance from the power source.
Allow the setter to cool. Clean the unit and
the heating rails with a cloth. (Occasionally
you may want to clean your rollers. Use a
damp cloth and mild detergent or soap.) If
any abnormal condition occurs, unplug the
hairsetter, allow it to cool, and return it to an
authorized service representative for repair.
STORAGE
Allow hairsetter to cool. Handle cord carefully
to prolong its life; avoid jerking or straining
at plug connections. Store hairsetter out of
reach of children in a safe, dry location.
HOW TO CURL YOUR HAIR
1. Place ends of hair on
roller and wind toward
scalp. Roll up hair firmly.
Remove clip from heated
rail and secure over
roller. Place another clip
on an aluminum rail for
heat-up. Continue to add
clips to heating rail as
rollers are added to hair.
2. The firmness of the
curl is regulated by the
diameter of the roller
and the length of time
the roller is left in
your hair.
3. For tight, firm curls, use smaller rollers and
leave in the hair for at least ten minutes
before removing. For soft, wavy curls, use
larger rollers and remove rollers after a
shorter period of time.
4. Removing roller:
Hold roller in one hand
while removing heated
clip with the other.
Gently drop roller (DO
NOT PULL) and let
curl bounce back after
roller has been completely removed. Let cool
for one minute for a firmly set curl, and then
style your hair into a look that lasts for hours.
IMPORTANT:
After using the hairsetter several
times, you will find the best roller selection and
the best timing for the texture of your hair and
for the result you desire.
Aluminum
heating core
Ceramic
thermal
layer
Soft
flocking
layer
Dual heat emits
from both the clip
and the roller for
extra hold.
MEDIUM ROLLERS
Use on short hair to
create fullness and tight curl. Tight curls
can be used at the nape of the neck and to
frame your face.
LARGE ROLLERS
Use on medium to long
hair to create a looser curl that’s bouncy and
full of body.
JUMBO ROLLERS
Use on medium to long
hair to create the smooth sleek lines of
softer, sophisticated hairstyles.
TO ORDER ExTRA ROLLERS
Rollers come packed three of the same size to a
carton. Rollers are sold by the carton only.
Model Description Price
RP150-H 3 Jumbo Rollers
$4.75
RP151-H 3 Large Rollers
$4.25
RP152-H 3 Medium Rollers
$3.75
RP153-H 5 Heated Clips
$4.75
Please add postage and handling to all orders.
Postage and handling is as follows: Orders
up to $5.00: add $.50 to order. Orders from
$5.01 to $10.00: add $1.00 to order. Orders
of $10.01 and over: add $1.50 to order.
MAIL ORDER TO:
Conair Corporation
150 Milford Road, East Windsor, NJ 08520
Service Department
7475 North Glen Harbor,
Glendale, AZ 85307
Include return name and address and model
number of replacement rollers. Please make
check payable to Conair Corporation.
WARNING:
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF,
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electrical appliance is still
electrically live even if the switch is off? If
the plug is in, the power is on. So when you
are not using your appliances, keep them
unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
LIMITED ONE-YEAR WARRANTY
Conair will repair or replace (at our option) your
unit free of charge for 12 months from the date
of purchase if the appliance is defective in
workmanship or materials.
To obtain service under this warranty, return the
defective product to the service center listed
on back, together with your purchase receipt
and $5.00 for postage and handling. California
residents need only provide proof of purchase
and should call 1-800-366-0937 for shipping
instructions. In the absence of a purchase
receipt, the warranty period shall be 12 months
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 12-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY.
Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, ExPRESS
OR IMPLIED, WHATSOEVER.
Some states do
not allow the exclusion or limitation of special,
incidental, or consequential damages, so the
above limitation may not apply to you. This
warranty gives you specific legal rights, and
you may also have other rights, which vary from
state to state.
Please register this product at:
www.conair.com/registration
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2012 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
IB-11476
12PH132584
