2
Comway product configuration software can connect DTU or RTU through serial
ports, Ethernet, WIFI and VPN networks, etc., and can configure Comway's 4G DTU and
RTU products. Due to the limitation of the software interface, the setting of more complex
functions needs to refer to the "COMWAY 4G DTU Extended AT Command Set", and
realize it through AT command configuration.
1.
Install and run 4G DTU configuration software:
Download and unzip the configuration file, run " dtu_config.exe ” to see the interface
as shown below:
Select 4G DTU general configuration in the product list to read and configure
parameters.
2.
Configuring the Software Dashboard
In the configuration page list as shown above , select Dashboard. On the right
interface, first connect the DTU through the serial port or network port.
1)
Methods for a computer to connect to the DTU:
The 4G DTU configuration software can connect the DTU through the serial port,
Ethernet port or WIFI of the computer, as shown in the figure below
