RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Configuration Pages - 57
Security | Switch | Auth Method
Security | Switch | Auth Method
This page allows you to configure how a user is authenticated when he logs into the MP1204-XT via one of the
management client interfaces.
Item
Configuration | Security| Switch | Auth Method
Client
The management client for which the configuration below applies.
Methods
Method can be set to one of the following values:
•
no
: Authentication is disabled and login is not possible.
•
local
: Use the local user database on the switch for authentication.
•
radius
: Use remote RADIUS server(s) for authentication.
•
: Use remote server(s) for authentication.
Methods that involve remote servers are timed out if the remote servers are off-line.
In this case, the next method is tried. Each method is tried from left to right and
continues until a method either approves or rejects a user. If a remote server is used
for primary authentication it is recommended to configure secondary authentication
as local. This enables the management client to login via the local user database if
none of the configured authentication servers are alive.
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
