24 -
DeviceMaster AIR User Guide
: 2000365 Rev. C
Hardware Installation and WLAN Configuration
Loading Wireless Configuration System Settings
Loading Wireless Configuration System Settings
Use your web browser to access the
Admin
tab to load previously saved system
settings.
If you updated the wireless firmware and want to load the configuration settings
that you saved, make sure that the computer has an IP address within the same
range as the WLAN IP address of the DeviceMaster AIR. After updating the
wireless firmware, the DeviceMaster AIR is reset to the default IP address,
192.168.0.30.
1.
Open the web browser and enter the DeviceMaster AIR IP address.
2.
Select or type in user name in the
User Name
field.
3.
Enter the password, if a password was configured during initial installation.
4.
Select the
Admin
tab.
5.
Select
Browse
from the
System Settings
group, highlight the configuration file
you want to load, and select
Open
.
6.
Select
Load
from the
System Settings
group and
Ok
.
7.
Select
Continue
.