Comtrend Corporation CT-6373, User Manual

Page: 52 / 123

Port/VPI/VCI ATM Port (0-3) / VPI (0-255) / VCI (32-65535)
VLAN Mux Shows 802.1Q VLAN ID
Con. ID ID for WAN connection
Category ATM service category, e.g. UBR, CBR…
Service Name of the WAN connection
Interface Name of the interface for WAN
Protocol Shows bridge or router mode
IGMP Shows enable or disable IGMP proxy
QoS Shows enable or disable QoS
State Shows enable or disable WAN connection
6.1.1 VLAN Mux
VLAN Mux is a form of VLAN tagging that allows multiple protocols over a single
connection. It is especially useful for VDSL2 connections in packet transfer mode.
Adding a new connection with VLAN Mux is accomplished by selecting the
VLAN
Mux – Enable Multiple Protocols Over a Single PVC check box (as outlined in
red below). Enter a value for 802.Q VLAN ID in the box that appears below.
After proceeding to
STEP 3 in section 4.2 , the screen will appear as follows.
Notice that PPPoA and IPoA are not available.
51