Comtrend Corporation CT-5611E User Manual Download Page 23

Page: 23 / 82

STEP 3:

On this screen, you can choose the connection type and select the
appropriate encapsulation mode. The available options are shown.

PPPoA- VC/MUX, LLC/ENCAPSULATION

PPPoE- LLC/SNAP BRIDGING, VC/MUX

MER- LLC/SNAP-BRIDGING, VC/MUX

IPoA- LLC/SNAP-ROUTING, VC MUX

Bridging- LLC/SNAP-BRIDGING, VC/MUX

NOTE:

Please ignore the onscreen reference to 802.1q VLAN tagging; it is a
misprint. This function is not available for this router.

Click

Next

to continue…

NOTE:

The subsections that follow continue the ATM PVC setup procedure.

Enter the appropriate settings for your service. Choosing different
connection types will lead to a different sequence of setup screens.

4.2.1 PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE)

STEP 4:

Select PPP over ATM (PPPoA)

PPP over Ethernet (PPPoE) and click

Next

. The following screen appears. Enter the Username and

Password and select the connection options you wish. Review the
descriptions below for more details. Click

Next

to continue.

Summary of Contents for CT-5611E



















































































Search results

Summary of Contents for CT-5611E

Reviews:

Related manuals for CT-5611E

Brands by name

Popular brands

Comtrend Corporation CT-5611E, User Manual

Search results

Summary of Contents for CT-5611E

Reviews:

Related manuals for CT-5611E

Brands by name

Popular brands